I got the lucky chance to have a look at the soon to be available FxTec Pro¹
A post on the experiences with different security updates, now on Android 9 PIE.
See this post first!!!
The below is my S8- script for Android 9 Pie
Here Is a small guide in Disqus-formatting, that I have ‘published’ several times on the old GSMArena.com blog (with tiny variation).
UPDATE: Should in 2019 finally be more or less obsolete for wide enough windows!
Fast charging of batteries is very convenient, but comes at a price on the overall battery life.
Especially wireless fast charging has bad consequences!!
We all know that the screen eats a lot of power and the brighter the worse.
But it was new to me that blue is so much worse than red and green on Amoled.
And also that even almost zero brightness is rather costly
When normal uninstall or disable is not available for an app, we DO have a bigger axe for trimming devices, even un-rooted ones
(image from here)
A few month ago I bought the keyboard for an S8- And now I bought the phablet for it!
I have written several posts regarding batteries directly and indirectly, especially this old one.
But here I tried to summarise and update it.
I just found out that Samsung offers some click-on keyboard for several of their models. At the least for S8, S8+, Note8, S7, S7edge, Note7, S6edge+ and Note5
UPDATE: Bought an S8 for the keyboard, see this.
It sticks up 3mm above the display, and the protective case adds about 1-2mm to the back and width.
The BB Priv is often accused for heating issues. And indeed IF it is used intensively, it WILL heat.
The peak I have in recorded history was 48.5°C eight months ago on 2017-08-13 (on MarshMallow)
I have previously contradicted the claim that the BB Priv has a poor stamina, but here an even longer run.
This is a collage to contain the almost eight days (7d 20h), as the 3C Battery Monitor app can only show five days.
I finally got the mystery update AAW068 offered
If you want to reapply firmware to an AT&T priv that has been debloated, AND keep it debloated, you need a little trickery…
The BB Priv has a pretty nice stamina, if it is not too infested with bloat (mine is debloated).
Though some complains that a 3410 mAh battery is too small for a phablet with a 5.4″ QFHD display, it is enough for me.
5¼ days on 96% battery
This is with no trickery of radios off or similar. 4G, WiFi, NFC all turned on. GPS off though. ADD: BT off too.
I stumbled upon a strange bug in what Android can report to e.g. Windows trough the MTP/WPD interface.
Under some circumstances it reports a VERY wrong file size, but if you by WPD open a stream and copy the file until it sends no more bytes, it returns the correct full content.
I stumbled upon this nice project by Christophe Geers.
And edited and enhanced it to a tool that works a bit like an advanced REPLACE /UPDATE to a tree on the PC based on the name of the device and the drives it exposes.
It is an efficient way to get changed & new files from a device to a PC.
Update: Now supports Exclude also.
It works with a WPD connected device, e.g. an Android device USB-connected in MTP or PTP mode.
Here an example of some of the tree generated
Most backup tools does NOT allow you to do an incremental backup, but they DO allow you to deselect e.g. images. So use this tool to do the incremental backup of the huge WPD-exposed stuff like the images/videos/music, and let your backup tool do backups of all the rest – and in more finite time than a total backup of everything every time – thus making it a bliss to take backups much more often….
After many months of negotiations, BB and AT&T have FINALLY found a solution so the users of AT&T branded devices can get the newest updates without being connected to the AT&T network. 🙂
Here a few photos of my last three phones/phablets. (The Ip6- with a keyboard-case)
The september security updates has gone public – Just installed it.
Goes for both the generic and the AT&T branded one. See
For some reason a simple (non-administrative) dosbox did the trick this time.
A new version AAG145 is released for the Blackberry Priv on AT&T
Frustrated on this message, when trying to set/revoke some permissions?
And if the ‘official’ solution does not seem to work at first. You might need a tiny extra step…
As an addendum to my old general guide on battery performance here, a few things are different in Android Marshmallow.
Well I bought one after all, as it was available including customs and delivery for roughly $400 to Denmark.
The keys ARE tiny, and the device HUGE but I think I might end up finding it a lesser bad compromise that an Iphone+keyboard-case.
A couple of strange observations on the calendar in Ios
- Search only works within +/- one year from current date
- It is not only year 10000 safe, you can actually scroll way beyond year 100000 🙂
- You can scroll back in time even to BC, though strange bugs appears much before that
- Moving an appointment has some (academic) issues in the date selector
In an attempt to get out of the horrible Ios experience, I have ordered a couple of different stand-alone bluetooth keyboards
Phablet with tiny keys: Blackberry Priv.
For me the most vital app is the Messaging app for handling SMS/MMS. There is a new version, but ALL the basic flaws are still there (see this) and new have been added, along with new features.
ADD: There are bug fix versions too, see below.
I have made a simple test image to test the resolution of your eyes on a phone, phablet, tablet, laptop or PC!
The most common result is it is pointless to go beyond around 1/12000 of the viewing distance
Be SURE it is shown in the screens native resolution. e.g. 960 pixels should fill half a FullHD display. (or use one of the added ones with your screens resolution)
Be SURE that your browser or your windows settings doesn’t do any zooming or smoothing, i.e. one pixel in the image is one pixel on the display. (If in doubt take a magnifying glass -or macro camera- and look closely on the screen, it should be like the mock-up later in this post)
It is the point where the single line pair is indistinguishable from the double line we are looking for (that is where it is looks like one continuous thick line)
You will most likely find the finest resolution using the red or green figure.
Use any prescribed glasses that you normally would for the distance – we are testing resolution, not focusing ability.
NOTE: If you got a pentile display, usually the green will do! Pentile usually got red and blue subpixels in diagonal ‘lines’, so this might mess up the result, so you are testing the display and not your eyes, as the pixels are not in the normal square grid the test was made for. The rating of density for pentile is not the same as for a regular, so be careful doing the calculus. A test made for pentile in red or blue should rather use diagonal lines, but the alignment would matter. And things easily get a little muddy in counting the density. Other pixel arrangement exists out there too, that could have similar issues…
Currently the limitation in the amount of photons that can be caught versus the noise, set a limit for the dynamic range.
But what if the sensor output could not be over saturated?
When a sensor is advertised/sold as 1/2.3″ most people would think that is the diagonal of the sensor. Well it is NOT! It might even vary drastically between manufacturers.
For historical reasons the diameter of a fictitious Vidicon tube with the same active area is what is advertised!!
Unfortunately, it is even more confusing than that…
The ONLY way I could get a suitable replacement for my Xperia Pro was with an Iphone6- and a keyboard case.
I have now been using it for over four months – and still would love to upgrade it to something decent…
This is an attempt to replace some of the common myths, urban legends and misunderstandings with some facts.
(last updated 20181103)
There are at least three physical issues and one biological that are interesting:
1) Rayleigh’s criterion and sensor width.
F * √N < W , (N number of sensors in Mpixels, W in mm, red light F numerical aperture)
2) The eye’s real life resolution
Resolution beyond 1/12000 of viewing distance is pointless for most
3) Thermal noise.
Relative noise increases by 1/d, (+)almost √n and √T, (N number of sensors in Mpixels, d sensor diameter, T in kelvin, i.e. °C+273.15)
4) Effective pixel count
The effective pixel count falls with the amount of light, the less the pixel size the worse.
5) Stacking images
Stacking can compensate, but can not perform miracles.
6) Thickness of device versus sensor size
The angle of light to the sensor edges binds max sensor size to thickness.
The “Battery Use“-app is part of the OS, and is located
Settings > About phone > Battery use
First here is a collage of screen-dumps (click to view) from it (see comments towards the end)
- This thread is general in nature, but based on my Xperia neo Pro.
- Xperia phones DO have good stamina if set up and used correctly
I can get 4½ days of stamina WITH 3G+WiFi+Virus Scanner ON
- Set Brightness to 100%, and use widget “Brightness On/Off“,
Use On in direct sunlight only.
- Set Screen time out to 30 sec.
- Use the app AdBlocker to block specific apps from data connection.
- Use the app WapDroid to only allow WiFi at specific geographical ‘points’. (By Cell-ID NOT gps)
- Have the phone at optimal position.
Place on the desk not in the pocket while working.
- Exit apps if possible when you are finished.
- “Ads within Android apps found to consume 75% of the app’s power.”
- Avoid task-killers on the bloatware.
(The repeated killing and resurrection eats a lot of battery)
- Avoid ‘clever’ battery-apps in the background doing more harm than good.
- Note that the percentages in Battery Use are based on estimates.
- Consider if you need background data traffic or not.
- The “Android System”-drainage bug!
- Finally I have a few tests , if the above did not do the trick.
On general battery info and hints see this
(at least this is my intention on how it should end and be used)
It should give info about batteries, how the phone uses them, and (hopefully) with some good hints to how to get the most out of each battery (Life and Stamina). Many of the hints go for other hardware with Li-Ion batteries as well. Say Laptops, Toothbrushes…..
This thread is originated from SonyEricssons Xperia phones.
On problems with weird drops and raises: Try “Johan’s Trick” below once
The currently best advice I can give for the usage pattern is
● Try to charge fully and deplete to about 40-50%bc
● Once in a while drain battery deep to get calibration right
● Keep phone on desk/in bag, avoid pockets, to keep cool.
● Leave phone idle while charging (e.g. while sleeping).
Note that the ‘remaining percentage’ you see is an ESTIMATE not a measurement!